Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Metairie?
Chimney repair in Metairie typically costs between $250 and $1,800, with most common repairs landing in the $400 to $900 range. A simple crown patch or cap replacement sits at the low end, while relining a damaged flue or rebuilding a firebox pushes toward the top. You’ll get a written estimate before anyone touches your chimney, and we set the final price per job based on what the inspection actually finds.
One thing worth knowing up front: in Metairie, most chimney damage we see is water damage, not fire damage. The subtropical climate here means heavy summer rain and high humidity for months on end, and a masonry chimney that’s missing a proper cap or has a cracked crown soaks up moisture it never fully dries out. That moisture weakens mortar joints, spalls brick faces, and eventually rusts out the damper. When we sweep a chimney in Metairie, we’re looking for the early signs of that moisture damage at the same time. Catch it while it’s a $300 crown repair instead of a $6,000 rebuild and the math works out very differently.
We do this work year-round. Our technicians have up to 9 years of experience with masonry fireplaces, prefab inserts, and the flexible liner systems that fit most Metairie homes. If you want the broader picture of how cleaning and repair fit together, start on our Metairie Chimney Sweep page, then come back here for the numbers.
Chimney Repair Cost Breakdown (2026)
Here’s what the main repair categories typically run in the Metairie market. These are estimates, not quotes. The written estimate you get after the inspection is the number that counts.
| Repair Type | Typical Cost Range | When You Need It |
|---|---|---|
| Crown repair or rebuild | $300 – $1,200 | Cracks, crumbling concrete, or water pooling at the top of the chimney |
| Chimney cap replacement | $150 – $500 | Missing cap, rusted mesh, or birds and rain getting in |
| Flue tile repair or HeatShield coating | $600 – $2,200 | Gaps, cracked tiles, or mortar joints that have eroded |
| Relining with a DuraFlex system | $2,500 – $6,500 | Damaged liner, a gas insert going in, or a flue too small for the appliance |
| Firebox repair or rebuild | $900 – $4,500 | Brick spalling, missing mortar in the firebox, or a hearth that’s pulled loose |
| Masonry tuckpointing | $500 – $2,500 | Eroded mortar joints above the roofline or on a chimney stack |
| Smoke chamber or damper work | $350 – $1,800 | Rusted damper, poor draft, or smoke rolling into the room |
| Full sweep and inspection | $150 – $300 | Annual maintenance, or the first step before any repair |
What pushes a job from the low end to the high end? Usually it’s access and extent. A cap replacement on a chimney you can reach from a single-story roofline is a short visit. A firebox rebuild where the brick has spalled back to the backup wall takes a full day and a lot of material. Relining costs more than coating because you’re buying a whole new liner rather than restoring the existing one. HeatShield is the option we reach for when the flue tiles are still structurally sound but the joints or surfaces have deteriorated. It’s an in-place ceramic resurfacing that brings a failing flue back into service without a full liner tear-out, and that saves real money compared to the alternative.
On materials: we stock and install DuraFlex flexible liner systems, HeatShield restoration coatings, and components from Gelco, Olympia Chimney, Famco, and Copperfield. Those are trade-grade parts, not hardware-store substitutes. A cap that’s held on with the right fasteners and sized for the flue lasts far longer than a generic cover that rusts through in a few summers. Same story with liner systems. The difference in price between a proper DuraFlex liner and whatever a sweep-only operation source is less than most people expect, and the installed lifespan is not comparable.
What Affects Chimney Repair Pricing in Metairie
Several things move the final number. Some are about your house, some are about the climate here, and some are about how far the damage has gone by the time we see it.
- How far the water damage has spread. Metairie gets soaked every summer, and a chimney without a good cap or a sound crown absorbs that moisture into the brick and mortar. A cracked crown alone might be a $300 fix. If the crack has been letting water into the flue for several seasons, you’re dealing with spalled brick, eroded mortar, and possibly a failed liner, and that’s a different job entirely.
- Chimney height and roof access. A tall stack or a steep roofline means more setup, more time, and more equipment. Most single-story Metairie homes are straightforward. A two-story chimney with a lot of stack above the roofline takes longer, and that shows up on the estimate.
- Whether you need repair or full replacement. This is where HeatShield earns its keep. If the flue tiles are intact but the joints or surfaces have gone, an in-place coating restores the flue at a fraction of what a full reline costs. If the tiles themselves are cracked or displaced, a DuraFlex liner is the right answer. The inspection tells us which one applies, and we explain the reasoning before any work starts.
- Type of chimney and appliance. A masonry fireplace with a clay tile flue is a different job from a prefab insert with a factory-built chimney. Gas inserts often need a correctly sized liner to vent properly, and that’s a specific piece of work. We’ll tell you what your setup requires, not what’s easiest to sell.
- Parts availability. Because we carry Gelco, Famco, and Copperfield components as regular stock, a cap replacement or damper job doesn’t stall waiting on a special order. That keeps the labor hours low on straightforward repairs.
- Whether you catch it early. The single biggest factor in chimney repair cost is timing. A chimney that gets swept and inspected once a year gets small problems caught while they’re still small. A chimney that hasn’t been looked at in five years is where the big estimates come from.
How to Save on Chimney Repair
There’s no coupon for chimney repair, but there are real ways to keep the number down. The first is to get an annual sweep and inspection. In Metairie, that annual visit is your best defense against the moisture damage that turns small repairs into large ones. The second is to fix the cheap stuff first. A missing cap and a cracked crown are two of the least expensive repairs on the list, and they’re also two of the most consequential to ignore. Water gets in through both, every summer, and works its way down.
Third: ask about HeatShield before you accept a reline quote from somewhere else. If your flue tiles are sound and the problem is surface deterioration or joint erosion, an in-place restoration can be a fraction of the cost of a full liner. We’re equipped to do that work and we’ll tell you honestly when it applies and when it doesn’t. Fourth: get the inspection first. A lot of homeowners call for a repair when what they need is a cleaning and an assessment. If a sweep and inspection is all your chimney needs, that’s what we’ll tell you.
Estimates are free. Call (855) 630-9846 to book one. If you’re in Metairie or nearby, we answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. Our Metairie page covers the neighborhoods we work and what to expect on a visit. And because your dryer vent is a chimney too, a single visit can cover both. A clogged dryer vent carries the same fire risk as a neglected flue, and most homeowners never think to have it looked at. We clean dryer vents alongside chimney work, which means one appointment covers the two biggest venting fire risks in the house.
What Happens When You Call
You’ll describe what you’re seeing. Maybe it’s smoke rolling into the room, a smell you can’t place, or a chimney that just looks rough from the driveway. We’ll ask a few questions and set up an inspection. When the technician arrives, they’ll sweep if it’s due, inspect the flue, firebox, crown, cap, and damper, and give you a written estimate for anything that needs fixing. Found during your sweep, fixed on the same visit is how we prefer to work. There’s no separate diagnostic fee, and the estimate is free. You decide what to authorize.
FAQs – Chimney Repair Cost
How much does a chimney sweep and inspection cost in Metairie?
Expect $150 to $300 for a standard sweep and inspection. That’s the starting point for most repair conversations, because the inspection is what tells you whether you’re looking at a $300 repair or a $3,000 one. Call (855) 630-9846 for an exact quote; estimates are free.
Is it cheaper to repair the liner or replace it?
Usually repair, when the flue tiles are still structurally intact. HeatShield in-place restoration typically runs $600 to $2,200, while a full DuraFlex reline runs $2,500 to $6,500. If the tiles are cracked or displaced, repair isn’t an option and relining is the right call. The inspection settles it. Call (855) 630-9846 and we’ll walk you through what your flue actually needs.
Why is chimney repair so common in Metairie compared to other places?
Because of the rain and humidity. Metairie gets heavy summer rainfall and sustained humidity that masonry chimneys absorb year after year. Without a sound crown and a proper cap, that moisture works into the brick and mortar and causes spalling, joint erosion, and eventually liner damage. Most of the repair work we do in Metairie traces back to a moisture problem that a $300 crown repair would have prevented. Call (855) 630-9846 to get yours inspected before the next rainy season.
Can you fix a cracked chimney crown without rebuilding the whole chimney?
Yes, in most cases. A crown repair or rebuild runs $300 to $1,200, and that’s a fraction of a full chimney rebuild. The crown is the concrete cap at the top, and it’s designed to shed water away from the flue. When it cracks, water gets straight into the masonry below. Repairing the crown early is one of the highest-return fixes on any chimney. Call (855) 630-9846 for a free estimate.
How much does it cost to repair a firebox in Metairie?
Firebox repair or rebuild typically runs $900 to $4,500, depending on how much of the firebox has spalled and whether the hearth has moved. A small mortar repair sits at the low end. A full rebuild with new firebrick sits at the high end. Because we’re equipped for HeatShield coating and carry trade-grade materials, we can often restore a firebox that another company would quote as a full rebuild. Call (855) 630-9846 for a free estimate and an honest read on which approach applies.
Get a Free Chimney Repair Estimate in Metairie
If your chimney is showing cracks, you’re seeing water stains, or you haven’t had it inspected in a while, the smart move is to get a professional eyes on it before the damage spreads. We combine sweeping and repair in one company, which means the person who finds the problem can fix it, with materials built for the trade. Call (855) 630-9846 for a free estimate. We answer 24/7, and we dispatch 7am to 7pm, Sunday through Friday. Closed Saturday.
Pricing reflects the Metairie market as of 2026. Metairie Chimney Sweep offers free estimates – call (855) 630-9846.
Written by the team at Metairie Chimney Sweep.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Sarah Walsh"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Lamont Ellison"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Steve Ziegler