Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Metairie?
Fireplace services in Metairie typically run $189 to $349 for a standard chimney sweep, $150 to $275 for dryer vent cleaning, and $450 to $6,500 for repair work depending on whether you need a cap, a firebox coating, or a full liner installation. A Level 2 inspection with a camera usually lands between $225 and $450. Most homeowners book a sweep and inspection together, find out what’s actually wrong with the flue, and get a written estimate for any repair before work begins.
We’re Metairie Chimney Sweep, and we handle sweeping, dryer vent cleaning, and chimney repair as three connected service lines. That matters for pricing: when a sweep turns up a cracked flue tile or a rusted cap, you’re not paying a second company a second trip charge to come diagnose what we already saw. Our technicians have up to 9 years of experience, we’re licensed and insured, and estimates are free. Call (855) 630-9846. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
Here’s what the work actually costs in the Metairie market this year. These are typical ranges for the jobs we quote most often. The written estimate you get on site sets the final price, and it can land lower or higher depending on what the camera and the brush turn up.
| Service | Typical Range | What’s Included |
|---|---|---|
| Standard chimney sweep (wood-burning) | $189 – $349 | Brush and vacuum of the flue, firebox cleanout, basic visual check |
| Level 1 inspection | $125 – $225 | Visual check of accessible flue, firebox, damper, cap and crown |
| Level 2 inspection (camera) | $225 – $450 | Video scan of the full flue interior, often bundled with a sweep |
| Gas insert service and cleaning | $175 – $325 | Burner and log set cleaning, venting check, pilot and flame verification |
| Dryer vent cleaning | $150 – $275 | Full-length vent brush and vacuum, lint trap and exterior termination check |
| Chimney cap supply and install | $225 – $650 | Stainless or copper cap sized to the flue, fastened and sealed |
| HeatShield flue liner restoration | $1,200 – $2,800 | In-place resurfacing of cracked or spalling clay tile, no tear-out |
| DuraFlex stainless liner installation | $2,400 – $6,500 | Flexible liner sized to the flue, insulation, top plate, and connection |
| Crown repair or rebuild | $450 – $1,600 | Crack sealing on minor damage; full pour on a failed crown |
The single biggest swing in that table is liner work. A sweep and inspection might cost a few hundred dollars; a full DuraFlex liner installation runs into the thousands because it’s a materials-heavy job that involves sizing the flue correctly, insulating the liner, and sealing the top plate. HeatShield sits in the middle, and it’s the option a lot of homeowners don’t know exists. It restores a deteriorating clay flue from the inside without tearing the chimney apart, which is why it often comes in well under a full reline. We’re equipped to apply it, and we stock DuraFlex liner systems, so a problem found during your sweep can be quoted and scheduled by the same company that found it.
Gas insert service tends to stay cheap because there’s no creosote load to remove. Dryer vent cleaning is the lowest-ticket item on the list and, honestly, the one most people put off longest. Your dryer vent is a chimney too: it carries heat and lint up and out of the house, and when it clogs, that heat has nowhere to go. If your dryer is running hot to the touch or taking two cycles to dry a load, that’s the vent talking.
What Affects Fireplace Services Pricing in Metairie
Two houses on the same block can get quotes a few hundred dollars apart for what sounds like the same job. Here’s what moves the number.
- Flue condition found during the sweep. A clean flue with intact tile is a sweep and a bill. Heavy creosote glaze, cracked tiles, or a flue that’s been relined badly before turns the visit into a repair quote. The camera is what tells us which one you’ve got.
- Chimney height and roof access. Metairie homes are mostly single-story with low-pitch roofs, which keeps access straightforward. Taller chimneys or steep pitches mean more setup time, and setup time is labor.
- Liner size and length. A DuraFlex liner is priced by diameter and by the foot. A short flue on an interior chimney is a different job than a long run on an exterior chase that needs insulation to perform.
- Repair vs. replace. This is the fork in the road. If the tile is spalling but structurally sound, HeatShield restoration typically costs a fraction of a full reline. If the flue is cracked through or improperly sized, restoration won’t hold and a liner is the honest answer.
- Material grade. Caps, covers, and venting components come in a wide spread. We carry Gelco, Famco, and Copperfield components built for the trade, and we also work with Olympia Chimney supply. Hardware-store caps are cheaper up front and tend to be the reason we get called back out two winters later.
- Humidity and how the fireplace is used. Metairie’s damp air works on masonry year-round, and a chimney that sits unused for months holds moisture in the crown and flue. A fireplace that’s burned hard all winter builds creosote faster. Either way, the condition of the chimney at inspection, not its age, drives the quote.
One more factor worth naming: bundling. If we’re already on the roof for a sweep and inspection, adding a cap install or a crown seal is usually less than booking those as separate visits. That’s not a sales tactic, it’s just how trip costs work.
How to Save on Fireplace Services
You can’t control what the camera finds, but you can control what you spend to find out and how much repair you end up needing.
- Book the sweep and inspection together. A standalone Level 2 inspection followed by a separate sweep visit means paying for access twice. Combined, you get one trip and one clear picture of the flue.
- Ask about HeatShield before you agree to a reline. If a company’s only answer to cracked tile is a full liner, get a second look. In-place restoration is a real option for a lot of flues and it’s a fraction of the cost. We’re HeatShield-equipped, so it’s on the table from the start.
- Fix the cap before the flue. A missing or rusted-out cap lets water and animals straight into the flue. Replacing a $225 – $650 cap today is cheaper than the liner work a wet flue eventually needs.
- Get the dryer vent cleaned at the same time. Vent cleaning is the cheapest line item on this page, and it’s a genuine fire risk reduction. If we’re already in the house, it’s one visit instead of two.
- Burn dry, seasoned wood. Wet wood smokes and builds creosote faster, which means more frequent sweeps. This one costs you nothing and it stretches the interval between cleanings.
- Get a written estimate before any repair starts, and get it free. Call (855) 630-9846 and we’ll put the numbers in writing. No fee to come out and quote it.
What we won’t tell you is that the cheapest quote is the safe one. A $99 sweep that never goes on the roof and never looks up the flue isn’t a discount, it’s a skipped step. The price should reflect a real inspection, not just a brush.
Repair or Replace: Which Costs Less in Metairie?
Repair almost always costs less in the short term, and the real question is whether the repair will hold. A cracked crown, a missing cap, a spalling tile section: these are repair jobs, and HeatShield restoration or a new crown solves them for hundreds rather than thousands. A flue that’s cracked clean through, badly oversized for the appliance, or lined with something improper needs a full DuraFlex liner. Restoration coatings need sound substrate to bond to. On a failed flue, they don’t.
The honest way to find out is a Level 2 camera inspection. It’s the difference between guessing and knowing, and it’s the step that keeps you from paying for a reline you didn’t need or a coating that won’t last. If your sweep in Metairie turns up a problem, we quote the repair on the spot with the materials already on hand.
What’s Included in a Fireplace Service Visit?
Every visit includes an assessment, not just a cleaning. Here’s what a typical sweep looks like.
- Setup and protection. Drop cloths go down, and the work area is sealed and vented to a HEPA vacuum before anything gets brushed.
- The sweep. The flue gets brushed top-down or bottom-up depending on the setup, and the firebox and smoke shelf get cleaned out.
- The inspection. Damper operation, firebox condition, flue tile, cap, crown, and flashing. If a camera inspection is part of the visit, we run the flue on video and show you what we see.
- The assessment and quote. Anything found gets explained and priced in writing before any repair begins. You decide what gets done.
That last step is where the model matters. Some sweep-only operations hand you a list of problems and leave you to find a mason, a roofer, and a liner specialist. We do chimney repair as a core service, and we carry DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because professional-grade materials are what the job requires. A cap isn’t a cap, a liner isn’t a liner, and the trade-grade version is the one that’s still doing its job in ten years.
Why Does Dryer Vent Cleaning Belong in a Fireplace Guide?
Because it’s the same job in a different pipe. Your dryer vent carries hot, lint-laden air out of the house, and lint is highly combustible. When the vent clogs, the dryer runs hotter, dries slower, and the risk climbs. A dryer vent cleaning in Metairie typically runs $150 to $275, and it’s usually the cheapest safety measure a homeowner can book.
Warning signs that you’re past due: clothes take more than one cycle, the dryer cabinet is hot to the touch, the exterior vent flap doesn’t open fully, or it’s been more than a year since the last cleaning. We clean dryer vents alongside chimney work because the two belong together. Both are about moving heat and combustion byproducts safely out of the house, and both get ignored until something goes wrong.
Is It Cheaper to Repair a Chimney or Replace It?
Repair is almost always cheaper than a rebuild. A crown rebuild runs $450 to $1,600, a cap is $225 to $650, and HeatShield restoration is $1,200 to $2,800. A full chimney rebuild starts well above that. The catch: repair only works when the structure underneath is sound. Get the camera inspection before you decide, which is free with an estimate. Call (855) 630-9846 to set one up.
How Much Does a Chimney Sweep Cost in Metairie?
A standard sweep runs $189 to $349, and bundling the Level 2 inspection brings the typical visit to roughly $350 to $650 total. Gas insert cleaning is the lower end at $175 to $325. The estimate is free and the written quote sets the final price, so call (855) 630-9846 for an exact number.
Can You Fix What You Find on the Same Visit?
Often, yes. Caps, dampers, and minor crown repairs are routine same-day work, and we stock the Gelco, Famco, and Copperfield components that make it possible. Liner installations and HeatShield applications are scheduled jobs because they’re sized to the flue and materials have to be matched to it. Same-day service is available for the routine repairs, and we’ll tell you honestly on the visit what’s today and what’s scheduled.
Do You Charge Extra for Emergency or After-Hours Work?
The price is set per job by the written estimate, full stop. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. There’s no separate emergency rate to worry about. Call (855) 630-9846 and we’ll book you in.
Do I Need a Chimney Inspection Before I Use the Fireplace?
If it’s been more than a year since the last sweep, yes. An annual sweep and inspection runs $189 to $450 depending on the level of inspection, and it’s the step that catches a cracked tile or a blocked flue before it becomes a fire. It’s also the step that tells you whether you need any repair at all. Estimates are free, so there’s no reason to guess. Call (855) 630-9846.
Key Takeaways
- A standard chimney sweep in Metairie runs $189 to $349; a Level 2 camera inspection adds $225 to $450.
- Dryer vent cleaning is $150 to $275 and is the lowest-cost fire-safety item on the list.
- HeatShield restoration ($1,200 to $2,800) often replaces a full reline ($2,400 to $6,500) at a fraction of the cost when the flue structure allows it.
- We stock DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so a problem found during a sweep gets fixed by the same company.
- Estimates are free and the written estimate sets the final price. Call (855) 630-9846. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Fireplace Services Estimate in Metairie
Fireplace pricing comes down to what’s actually in your flue, and the only way to know that is to look. We sweep, inspect, clean dryer vents, and do real chimney repair with professional-grade materials, all with one company and one estimate. Our technicians have up to 9 years of experience, we’re licensed and insured, and the quote is free and in writing before any work starts. Call (855) 630-9846 to book your estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Metairie market as of 2026. Metairie Chimney Sweep offers free estimates – call (855) 630-9846.
Written by the team at Metairie Chimney Sweep.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Roger Gallagher"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Lamont Ellison"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Steve Ziegler